Wrong Choke Position On A Scotts Riding Mower
The choke is a component installed on the mower to restrict airflow. Less airflow is needed to start a cold engine. Engaging the choke closes the choke plate so a higher concentration of fuel is used to form combustion in the cylinder.
When the choke is not placed in the closed position, a cold engine will not start. Likewise, when the choke is not in the open position, a warm engine will not start.
SOLUTION: Make sure the choke is engaged when starting a cold engine and is off when starting a warm engine.
Depending on your model Scotts mower, you will either have to adjust the throttle lever to engage the choke or you will have a separate choke knob.
If the throttle lever is used to close the choke, move the lever to the choke position. Once the engine starts running and warming up, adjust the lever to the full throttle position.
If your model has a choke knob separate from the throttle lever, pull the choke knob out to close the choke. Place the throttle lever in the full throttle position and start the mower. Once the engine starts and warms up, push in the choke knob so the choke is open.
If the choke is in the correct position and you are continuing to have air flow problems, check for a plugged air filter, a stuck choke, or a worn choke cable.
Scotts Lawn Tractor Hood Assembly Complete
I have a very nice John Deere Lawn Tractor hood assembly made by John Deere for their Scotts Lawn Tractor brand name. The hood is complete with headlights and wiring, orange in color. This will fit John Deere L series tractors as well as others with the spring loaded attachment system on each side o …
Where Are Scotts Lawn Mowers Made
The Scotts employees have gone to great lengths to find companies that make lawnmowers that theyll label with the Scotts label. And they found two that fitted well. As a result, John Deere manufactures their electric mowers in a variety of locations across the United States, including Waterloo Iowa, Augusta Georgia, Greeneville Tennessee, and Horicon Wisconsin. On the other hand, the American Lawn Mower Company manufactures their hand-operated lawnmowers at their Shelbyville, Indiana factory.
Read Also: When Can I Put Fertilizer On My Lawn
Bad Battery Loose Cables Or Corroded Terminals On A Scotts Riding Mower
If the mower wont even turn over, check the battery, cables, and terminals. The battery must be charged at a reading of 12.7 volts or greater. Loose cables and corroded terminals can contribute to starting issues.
SOLUTION: Clean corroded terminals in a baking soda solution containing 2 cups of water and 3 rounded tablespoons of baking soda. Use a wire brush to scrub the terminals clean.
Test your battery with a multimeter. If you receive a reading of less than 12.7 volts, you must charge your battery. Read more about the steps and items needed to charge your battery here. If your battery does not hold a charge, you will need to replace it with a new battery.
Bad Or Old Fuel In A Scotts Riding Mower
![Scotts 46" Riding Mower W/ 19HP Briggs V Scotts 46" Riding Mower W/ 19HP Briggs V](https://www.lovemylawn.net/wp-content/uploads/scotts-46-riding-mower-w-19hp-briggs-v-twin-jersey-villagejv.jpeg)
Gas begins to break down and become less effective after about 30 days. Its important to purchase fresh fuel and consume it within 30 days.
The ethanol included in gas today is an environmentally friendly substance that works fine in most vehicles, but it is not a good choice for the small engine on your Scotts mower.
Ethanol attracts moisture and when that moisture evaporates, gummy deposits can be left in the fuel system to clog fuel lines, filters, and the carburetor.
SOLUTION: Remove the old fuel. A fuel siphon pump works well. Mix a fuel additive in fresh gas before adding it to your fuel tank. Using a fuel additive like Sea Foam is a good idea after running old gas. Read more about the advantages of Sea Foam in this article.
It not only stabilizes gas but also helps clean the fuel system and reduce moisture. After adding this gas and additive mix, start the mower and allow this mixture to work its way through the fuel system.
If you are still unable to start the mower, keep going through the list to determine the cause.
Read Also: How To Care For Sodded Lawn
Bad Fuel Pump On A Scotts Riding Mower
When your fuel tank is lower than the carburetor, the mower will have a fuel pump. This is required to push fuel up to the carburetor.
The fuel pump will have three ports: an inlet port, an outlet port, and a port that is connected to a line off of the crankcase that pressurizes the pump.
You may be able to visually recognize your fuel pump is bad by checking the pump for small cracks or fuel leaking. You will have to replace the fuel pump if you see cracks or fuel leaking outside of the pump.
If the fuel pump appears to be in good condition, you need to check the fuel lines to ensure fuel is getting to the fuel pump and fuel is being pumped out of the fuel pump.
SOLUTION:
Verify you are getting fuel to the fuel pump:
- Turn off the fuel valve or use pinch pliers to stop the flow of fuel. .
- Disconnect the line from the inlet port of the fuel pump and place it in a container that sits lower than the fuel tank.
- Unclamp or turn on the fuel valve and check to make sure fuel is flowing out of the tube into the container.
- If you are not getting fuel, check the fuel lines or the fuel filter for blockage.
Verify your fuel pump is pumping fuel to the carburetor:
Empty Gas Tank On A Scotts Riding Mower
Your gas-powered Scotts riding mower requires gas to run. When the tank is empty, youll need to refill it with gas.
I only mention the lack of gas can prevent the mower from starting because, sometimes out of frustration, one can forget the most obvious reasons for a starting failure.
SOLUTION: Fill the mower with fresh gasoline with an octane level of 87-grade or higher. Choose a gas with an ethanol level no greater than 10%.
Also Check: What Is The Best Commercial Lawn Mower
Faulty Ignition Coil On A Scotts Riding Mower
The ignition coil provides voltage to the spark plug so it can fire and start the engine. The engine will not start if the spark plug isnt able to fire.
SOLUTION: After you verified your spark plug is in good condition, check the continuity of your ignition coil using a multimeter. Replace the ignition coil if you find a break in the continuity.
Bad Safety Switch On A Scotts Riding Mower
A Scotts mower uses several safety switches in order to keep you safe when you are operating the lawn mower. These switches can become faulty and cause your lawn mower to not start.
SOLUTION: Test the switch using a multimeter or you can temporarily bypass the safety switch to identify a bad switch. Do not operate a mower without the safety switch installed for your safety. Always have safety switches installed and working on your equipment.
Recommended Reading: How To Start My Own Lawn Care Business
Faulty Charging System On A Scotts Riding Mower
While the charging system isnt the main reason your Scotts mower wont start, it can contribute to a weak battery that prevents the mower from starting.
When the charging system fails to charge the battery, the battery may not be able to start the mower the next time you go to use it.
A bad stator or alternator can be the problem along with several other electrical parts. Read this article to test your charging system here using an ohm meter.
SOLUTION: If you find the problem is in your charging system, have a small engine mechanic identify what is the actual cause of the failure. It could be several different items and you will just be guessing at the problem which gets pretty expensive.
Do They Still Make Scotts Lawn Mowers
Today, an array of lawn mowers are sold under the Scotts name, including reel-style, human powered mowers, electric and gas walk behind mowers , standard riding mowers, and zero turn mowers.
What is John Deere Scotts?
Scotts lawn tractors by model Related brands: John Deere. The Scotts/Miracle Gro company sold a line of Scotts branded tractors, all built by other maufacturers. The final line of Scotts lawn tractors were built by John Deere. These same models were later sold as Sabre brand tractors by Deere.
Where are great states reel mowers made?
Last year, the American Lawn Mower Co./Great States Corp. in Shelbyville, Ind., which manufactures almost all of the non-power reel mowers in the U.S. market, reported record sales of 300,000 of the scissors-quiet machines.
Read Also: How To Permanently Get Rid Of Weeds In Lawn
Reasons A Scotts Riding Lawn Mower Wont Start: Solved
Your Scotts riding mower is getting older and you can no longer get it started. Before you give up on your mower and purchase a new one, check out my list below to get your mower up and running again.
A Scotts riding mower wont start when it doesnt get the air, spark, and fuel required. This may be caused by a plugged air filter, wrong choke setting, dirty carburetor, clogged fuel lines, plugged fuel filter, bad spark plug, faulty ignition coil, or a weak battery.
Keep reading for additional items that can cause your Scotts mowers starting problem. Follow all safety precautions found in your Scotts operators manual. This includes removing the spark plug wire prior to performing repairs.
This post may include affiliate links. Purchases made through these links may provide a commission for us, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Follow all safety instructions provided in your equipment operators manual prior to diagnosing, repairing, or operating.Consult a professional if you dont have the skills, or knowledge or are not in the condition to perform the repair safely.
How To Take A Mowing Deck Off A Scotts Riding Lawn Mower
![Scotts 46" Riding Mower W/ 19HP Briggs V Scotts 46" Riding Mower W/ 19HP Briggs V](https://www.lovemylawn.net/wp-content/uploads/scotts-46-riding-mower-w-19hp-briggs-v-twin-jersey-villagejv.jpeg)
If you are having trouble with the blades on your Scotts riding mower, or you just want to clean the grass build up from underneath the deck, removing the deck from the lawn tractor will make the task much easier. It doesnt require any tools to take off the deck, but you should protect your hands from sharp blades and metal, so wear heavy gloves. Several models of Scotts riding mowers were manufactured for Scotts Miracle-Gro Company from 1998 to 2002. These instructions are for models L1742, L17.542, L2048, and L2548.
1.
Park the Scotts riding mower in a level area. Turn off the engine and remove the key.
2.
Place a wooden block at each corner of the mower deck. Lower the deck down onto the blocks. The mower deck should be in its lowest position.
3.
Detach the power take-off drive cable from the deck by pulling the spring locking pin out of the end of the PTO drive cable. Pull on the end of the PTO drive cable to release it from the bracket. Slide the PTO cable up out of the bracket. Attach the PTO drive cable to the peg on the left side of the tractor frame, using a spring locking pin so it will not hang down and catch on the deck when removing it.
4.
Unhook the cable spring from the deck bracket. The cable spring looks like a long, tight spring with a hook on the end and is attached to a cable.
6.
Remove the front draft rod by pulling off the spring locking pin and sliding the washer off the peg.
Also Check: How Much Does Lawn Care Usually Cost
Who Sells Scotts Lawn Mowers
Scotts Lawn Mowers are the most popular agriculture machine all over the world. Scotts mowers are manufactured by John Deere.
These mowers are used in the outdoor equipment industry and landscaping. They are totally different from mowers like gas or electric-powered mowers. And Scotts lawn mowers are completely powered by the human hand.
All products of the Scotts come with durability and better performance. Scotts are known best for their quality lawnmowers.
Apart from the manufacturer, Scotts Lawn Mowers are sold by some most popular online markets. Besides, Scotts is a manufacturer company and it also has its own website for direct sell options.
So, purchase the best products from reliable platforms. Lets know in detail who sells Scoots Lawn Mower.
Two Problems With Scotts John Deere Mower
Hi I have a L17.542 John Deere Mower made for Scotts. I bought this used and have a couple of things that I need assistance with.
1) The two front tires are “pigeon toed”. Meaning that when parked with the wheels straight the two front tires are pointing inward. I’d like to get these wheels so that they are straight as I’ve seen most every other riding mower along with my first JD mower…
2) the second problem is that the mower has an annoying intermittent vibration when mower blades are engaged. I removed the blades and sharpened/balanced them but no difference. I am not sure what could be causing it but could use some ideas. The best way to describe it is that it vibrates every second. When the deck is disengaged the mower is smooth and quiet.
Any help would be greatly appreciated. Thank you!
Chris
Also Check: How To Get Rid Of Burrs In Lawn
Plugged Fuel Filter On A Scotts Riding Mower
A fuel filter strains the fuel coming out of your fuel tank and running through your fuel system to keep out any dirt or debris.
Old fuel can leave gummy deposits when it evaporates. This along with dirty fuel may plug the fuel filter. A plugged filter will keep a sufficient amount of fuel from passing through the filter and may cause your Scotts mower starting problem.
SOLUTION: A fuel filter that is plugged must be replaced.
Bad Spark Plug Or Loose Connection On A Scotts Riding Mower
Another reason your Scotts mower wont start may be due to a bad spark plug connection or a damaged spark plug. A dirty spark plug can also cause intermittent spark problems.
SOLUTION: Remove your spark plug and inspect it for signs of carbon buildup, cracked porcelain insulator, or burnt electrode. Replace it with a new spark plug if you find any of these conditions.
Make sure to gap them according to the manufacturers specifications. Securely attach the spark plug wire once you are done troubleshooting and repairing the mower.
A loose wire or wrong electrode gap can cause a starting or intermittent running problem.
Recommended Reading: Who Makes The Most Reliable Riding Lawn Mower
Who Makes Earthwise Lawn Mowers
American Lawn Mower CompanyAmerican Lawn Mower Company/Great States is a family-owned, U.S.-based company celebrating 118 years in the lawn and garden business.
How do you start a Scott lawn mower?
Turn the ignition key to the Start/On position and crank the engine for up to five seconds to engage it. Release the key to the Run position once the engines starts. If the engine fails to start, let the key fall back to the Run position and wait for 10 seconds before repeating the starting procedure.
Who is Earthwise?
American Lawn Mower Company/Great States is a family-owned, U.S.-based company celebrating 118 years in the lawn and garden business. The company was one the earliest manufacturers of reel mowers and still handcrafts 11 different types of reel mowers under two labels.
Bad Starter Solenoid On A Scotts Riding Mower
A lawn mower solenoid is an electromagnetic switch that is like an on-off switch that actuates the starter motor to turn over the engine. A click or hum when turning your ignition key is an indication to check your solenoid.
Another indication your riding mower solenoid may be bad is when a wire attached to your solenoid gets hot and begins to smoke or melt.
SOLUTION:Test your Scotts mower solenoid by following the steps here. Replace your solenoid if it is found to be bad.
You May Like: Where To Find Craftsman Lawn Mower Model Number
Plugged Air Filter On A Scotts Riding Mower
Your air filter should be cleaned or changed frequently so your engine can continue to pull in clean air. When airflow is blocked because of a plugged air filter, the engine runs hot and searches for air where ever it can find it including air remaining in the crankcase.
A plugged air filter may not only cause starting issues, but it may also cause the engine to overheat, smoke, and cause engine damage.
SOLUTION: Clean your paper air filter and replace it if very dirty or damaged.
Clean a Scotts riding lawn mower paper air filter:
- Remove the filter from the air filter housing. Be careful to not let any dirt fall into the air intake.
- Wipe out any dirt level in the housing with a clean cloth.
- Tap the filter against your hand or solid surface to remove excess dirt.
- Hold the filter up to the light to check to see if light can be seen through every area of the filter. If you cannot see the light, the filter is damaged or torn, or it no longer seals right, you must replace it.
- Install the filter.
Clean a Scotts riding lawn foam pre-filter:
If your Scotts mower uses a different type of filter, refer to the operators manual or read Guide to Lawn Mower Air Filters.
Bad Gas Cap On A Scotts Riding Mower
![Scotts 46" Riding Mower W/ 19HP Briggs V Scotts 46" Riding Mower W/ 19HP Briggs V](https://www.lovemylawn.net/wp-content/uploads/scotts-46-riding-mower-w-19hp-briggs-v-twin-jersey-villagejv.jpeg)
The fuel tank must be able to vent allowing air to pass into and out of the tank to keep the tank pressure and atmospheric pressures equal.
The vent for the Scotts fuel tank is located in the gas cap. When the vent becomes plugged, the fuel tank will form a vacuum keeping fuel from getting to the carburetor.
SOLUTION: Replace a broken gas cap that is no longer venting properly.
Don’t Miss: How Much Does It Cost To Sod Your Lawn